AIR COMPRESSED DRYER DC, 230V  50-60Hz

       Dew-Point -25°C  Air flow 5-20 m3/h
Incorporated hopper on insulated stainless steel
Outlet air Filter
Dryer DC5-MT projected for the dehumidification of hygroscopic materials with an elevated output and a low energy consumption. It uses dry compressed air of net (Dew-Point average value of -25 °C) that opportunely filtered and heated, it is introduced in the incorporated hopper of dehumidification.
Endowed with exchange valves, pressure switchs for the constant pressure check in line of the compressed air and with heating resistance made of armoured stainless steel .
The microprocessor electronic control checks constantly the planned set-point of air temperature of dehumidification and besides it can check a Venturi loader for the automatic material loading
Principal caracteristics:
- Coalescence Filter for the inlet air filtration;
- Insulated stainless steel heating booster;
- Armoured stainless steel resistance;
- Pressure switch for the compressed air in line control;
- Safety against the resistance sovratemperature for the resistance protection ;
- Manual regulation of the air flow;
- Material antistress control;
- Microprocessor electronic control ;
- Electric panel with voltage 230 V 10%/1Ph/50-60 Hz.
Technical data
- air flow: 5-35 m3/h
- power heating: 0.5- 0.8kW
-maximum temperature of process: 150°C
- average consumption 80°C: 0.1 kWh

 

  DRYER  DR202-MT, 230V±10%/1/50-60Hz    

    Dew-Point -45°C        Air flow 40 m³/h      

230V 10%/1/50-60Hz
Desiccant dryer DR202-MT suitable for dehumidifying hygroscopic plastic granules. Designed with high perfomances and low energy consumption;        twin molecular sieves towers assuring a continuous and constant process   with an average Dew-Point of -45°C.
Main features:
- insulated stainless steel towers;
- insulated stainless steel heating chamber;
- internal armoured stainless steel resistances;
- one high head side channels blower, either for process and regeneration;
- safety thermostat to prevent resistances overheating;
- process filter with large filtering surface;
- microprocessor control;
- electrical panel box with 230 V 10%/1Ph/50-60 Hz supply;
- equipment manufactured according to CE standards.
Technical characteristics:
- air flow: 40 m3/h
- static pressure: 250 mbar
- blower power: 0.2 kW
- heating power: 0.8 kW
- total power: 1.7 kW
- max. process temperature: 150°C
- average consumption at 80°C: 0.7 kW
- noise level: dB(A) <75
- overall dimensions (WxDxH): mm 280 x 420 x 470
- unit weight: kg 60
 

        DESICCANT DRYER DR204/205/206/207 MT, 400V 10%/3+N/50-60Hz
suitable for dehumidifying hygroscopic plastic granules. Designed with high perfomances and low energy consumption; twin molecular sieves towers assuring a continuous and constant process with an average Dew-Point of -45°C.
Main features:
- insulated stainless steel towers;
- insulated stainless steel heating chamber;
- internal armoured stainless steel resistances;
- one high head side channels blower, either for process and regeneration;
- safety thermostat to prevent resistances overheating;
- process filter with large filtering surface;
- microprocessor control;
- alarms synoptic and operator control panel;
- air process PID electronic thermoregulator;
- electrical panel box with 400V 10%/3+N/50-60 Hz supply;
- equipment manufactured according to CE standards.
 

T

      DESICCANT DRYER DRD400÷414 MT, 400V 10%/3+N/50-60Hz
suitable for dehumidifying hygroscopic plastic granules. Designed with high perfomances, low energy consumption and large versatility.
Twin molecular sieves towers assuring a continuous and constant process with an average Dew-Point of -60°C.
Main features:
- insulated stainless steel towers;
- insulated stainless steel heating chamber;
- internal armoured stainless steel resistances;
- two high head side channels blowers, one for process and one for regeneration;
- safety thermostat to prevent resistances overheating;
- process filter with large filtering surface;
- microprocessor control;
- alarms synoptic and operator control panel;
- air process PID electronic thermoregulator;
- electrical panel box with 400V 10%/3+N/50-60 Hz supply;
- equipment manufactured according to CE standards.
Technical characteristics:
- air flow: 1000 ÷5000 m³/h
- static pressure: 250 mbar